Thinkcar Thinktool mini OBD2 Scanner Professional Diagnostic Tool ECU Coding OBD 2 Automotive Scanner Active test ABS SAS Reset Tool - AUTOOLSEE
1 / 1

Thinkcar Thinktool mini OBD2 Scanner Professional Diagnostic Tool ECU Coding OBD 2 Automotive Scanner Active test ABS SAS Reset Tool

0 sold


12-Month Hassle-Free Warranty

30-Day Money-Back Guarantee

Shipping Around The World

Read details »

Thinktool mini with 5.99'' touchable screen and Android 10 operating system supports auto vin, quick check print, vehicle diagnostic report share, data store and playback, live data stream, diagnostic feedback, screen recording, ect. All those humanized design of this car diagnostic tool provides you with an efficient diagnostic experience.

Thinktool mini Supports All Systems Diagnostics

This function allows you to detect whether the system parameters are normal or not, Including: ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System, ect...

Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review.


Active Test: 

The Active Test function is used to access vehicle-specific subsystem and component tests. Available test vary by manufacturer, year, and model, and only the available tests display in the menu.



ECU Coding: 

The ECU Coding of this diagnostic tool can work on most vehicle makes. It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts.



Thinktool mini 16 Special Service Functions:

  1. Oil Lamp Reset Service: Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

  2. EPB Electronic Park Brake Reset: It is important in the maintenance of the electronic braking system's safety and efficiency.

  3. BAT battery service: allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

  4. DPF Diesel Particulate Filter Reset: Especially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in, and DPF teach-in after replacing the engine control unit.

  5. SAS Steering Angle Sensor Reset: Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

  6. TPMS Tire Pressure Monitoring System Reset: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs, and testing sensors.

  7. IMMO Key Programming: The unique car key programming and read pin code function, is mainly used to disable the lost vehicle keys and program a new replacement key fob.

  8. ABS Bleeding: ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

  9. Sunroof Reset: The sunroof needs to be reset when the sunroof control unit has a communication problem or changes.

  10. Suspension Reset: Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on-off.

  11. Gearbox (Transmission )Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

  12. AFS Headlamp Reset: 'AFS' means Adaptive Front-lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

  13. Injector Coding: Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

  14. Throttle Adaptation: The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel-injected car, a throttle position sensor and airflow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

  15. Gear Learning: The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

  16. EGR Reset: Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

  17. A/F Reset: This function is applied to set or learn Air/Fuel ratio parameters.

  18. Adblue Reset(Diesel Engine Exhaust Gas Filter): After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.

  19. Airbag Reset: This function resets the airbag data to clear the airbag collision fault indicator.

  20. Coolant Bleeding: Use this function to activate the electronic water pump before venting the cooling system.

  21. AT Learning: This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shifting delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

  22. Language Change: This function is used to change the system language of the vehicle central control panel.

  23. Nox Sensor Reset: Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

  24. ODO Reset: ODO reset is to copy, write, or rewrite the value of kilometers in the chip of the odometer by using a car diagnostic computer and data cable so that the odometer shows the actual mileage.

  25. Stop/Start Reset: This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

  26. Seat Calibration: This function is applied to match the seats with memory function that are replaced and repaired.

  27. Transport Mode: ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

  28. Windows Calibration: This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of the power window.


Thinktool mini supports OBDII (on-board diagnostics) protocols:

Mode 01---Request current powertrain diagnostic data

Mode 02—Request freeze frame information

Mode 03—Request emissions-related diagnostic code

Mode 04—Clear/reset emissions-related diagnostic information

Mode 05—Request oxygen sensor monitoring test results

Mode 06—Request on-board monitoring test results for specific monitored systems

Mode 07—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle

Mode 08—Request control of on-board system, test or component.

Mode 09—Request vehicle information.

Mode 0A—Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.


Thinktool mini supports languages:

English, French, German, Spanish, Russian, Italian, Portuguese, Japanese


94 model software + 16reset software free, all models free with basic functions of the whole system, upgrade lifetime free. After purchasing the model separately, full functions (decoder function) can be realized. Purchase model software separately for $49.95 per year

Support more than 220+ Car Brands


Product details



Operationg system: Android 7.0

RAM: 32G

LCD: 5.99 inch

LCD Resolution: 1920 x 1200 IPS

Touch screen camera: 800 megapixel

Connection Method: Wi-Fi

Bluetooth: supported


Package List:

Without Printer

1 x THINKTOOL mini

1 x USB Cable

1 x User Manual

1 x Bluetooth Driver


With Printer

1 x THINKTOOL mini

1 x USB Cable

1 x User Manual

1 x Bluetooth Driver

1 x Printer


You May Also Like Don't Like These?