DP500 is a new Android-based vehicle trouble diagnostic device developed for internet applications. Contains key programming, mileage correction, oil/service reset and special functions like ABS bleed, gear learning, EPB, TPS, SRS reset etc. It covers wide range of vehicles, featured powerful function, and provides precise result. All-in-one machine structure, more convenient to use, full optimization hardware, running more stable, faster and smoother.
TOP 7 Reasons to Choose ANCEL DP500
Mileage Correction: Write/Read ODO, Read/Write EEPROM, Read/Write Flash
Key Programming: Add/Erase Key, All Key Lost Programming, Programming Remote, Key Numbers Reading, Reading Pin Code, Reading EEPROM Chip, Remote Matching
Multi-language: English, Spanish, Polish, Portuguese, French, German, Italian, Russian
7 inches Android Tablet
11 Special Function Oil Reset Service, ABS Bleeding, Gear Learning, CVT Reset, Battery Match, EPB Adaptation, TPS Adaptation, Steering Angle Reset, DPF Regeneration, Injector Coding, Suspension Matching
One Click Free Update via WIFI
Professional Mileage Adjust Master
ANCEL DP500 Key Programming Function
All Key Lost Programming
Key Numbers Reading
Reading Pin Code
Reading EEPROM Chip
11 Special Functions
Oil Reset: The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the mileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
ABS Bleeding: When the ABS contain air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed.
CVT Reset: This function is used to reset the compensation code and initialize the ECT after a solenoid value or value body assembly has been replaced.
Gear Learning: Crankshaft position sensor adaptive learning.
Battery Matching: This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start &stop function, sunroof without one-key trigger function, power window without automatic function.
Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument panel.
EPB Adaptation: It is important in the maintenance of electronic braking system rsquos safety and efficiency when replace brake pad or motor.
TPS Reset: Vehicle's throttle position system sensor connected to the butterfly spindle and is primarily used to monitor the throttle position within an inner combustion engine. Due to its location, the throttle position sensor is able to effectively observe where the throttle butterfly valve is positioned.
Steering Angle Reset: To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.
DPF Regeneration: DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode (such us high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b) The PM trap is removed or replaced
c) The fuel additive nozzle is removed or replaced
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.
Injector Coding: Diesel injector code need programming ID and parameters to the ECU for accurate communication and Injection control system.
Suspension Matching: This function can adjust the height of the body. When replacing the body height sensor in the air suspension system ,or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.
English, Spanish, Polish, Portuguese, French, German, Italian, Russian
Supports One Key Upgrade Via Wi-Fi
Built-in WIFI mode can realize application, downloading and diagnostic function by one key upgrade.
Supports Remote Assistance
This application can realize remote hosting operation via the third party's software: Quick Support
Operation System: Android 5.1.1
CPU: RK3128 Quad-core, ARM Cortex A7@1.2Ghz
Battery: 3800mA, rechargeable polymer lithium battery
Extension memory card: 32G Micro SD (TF) card supported
Storage capacity: 16GB
LCD: 7 inch
LCD resolution: 800*480
Touch screen: capacitive touch screen
Working temperature: -20℃～55℃（14℉～131℉）
Storage temperature: -20℃～70℃（-4℉～158℉）
Dimension: 245 x 149 x 35mm
Support Car Models
For BMW, for PORSCHE, for BENZ, for HONDA/ACURA, for CITROEN/PEUGEOT, for BYD, for GREATWALL, for VW/SEAT/SKODA/AUDI, for FIAT, for TOYOTA, for FORD, for JAGUAR, for GEELY, for CHRYSLER/DODGE/JEEP, for RENAULT, for DACIA, for SUZUKIT , for LANDROVER, for MAZDA, for LUXGEN, for OPEL, for CHERY, for KIA, for NISSAN/INFINITI, for ROEWE, for MITSUBISHI, for SSANGYONG, for SUBARU, for SMART, for GM, for ISUZU, for HYUNDAI, for IVECO, for ZOTYE, for VOLVO, for DAEWOO
For Key Programming
For Ford EXPLORER/EXPLORER SPORT/TRANSIT CUSTOM/RANGER/FUSION etc supports up to 2019
For Renault CLIO/CAPTURE/DUSTER/KOLEOS etc supports up to 2015
For GM EQUINOX/MALIBU/TERRAIN supports to 2020
For GM CASCADA /ENCLAVE/REGAL/ESCALADE/CAMARO/IMPALA etc supports up to 2019
For Hyundai ACCENT/ELANTRA SEDAN/G90/GENESIS/KONA/SONATA etc supports up to 2019
For Land Rover DISCOVERY 4/RANGE ROVER/RANGE ROVER EVOQUE supports up to 2015
For Volvo S60/V40/XC60 supports to 2017
For MAZDA 6/MAZDA CX-3/MAZDA CX-5 etc supports up to 2018
For Mileage Correction
For VWH, for SKODA, for AUDI, for SEAT, for PORSCHE, for BENZ, for FORD, for CHRYSLER, for GM, for HYUNDAI, for INFINITE, for KIA, for MAZDA, for MITSUBISHI, for NISSAN, for SSANGYONG, for SUBARU, for SUZUKI. for FIAT, for CITROEN, for LANDROVER, for JAGUAR, for RENAULT, for PROTON, for PEUGEOT, for OPEL, for VOLVO, for SMART, for TOYOTA/LEXUS, for ALFA, for IVECO
For Chrysler 300C/PACIFICA/CHALLENGER/CHARGER/DURANGO/RAM etc supports up to 2018
For Ford F250/F350/F450/F550/FIGO/ASPIRE/KA supports up to 2018
For Renault CAPTUR/CLIO/TRAFIC IV supports up to 2017
For GM TRAILBLAZER supports up to 2019
For GM ESCALADE / XTS / COLORADO supports up to 2018
Support part of ALFA/Porsche mileage correction
Note: please contact us if you want to know more details.
1*Quick Start Guide
1*P001 Programmer Unit